Showing:

Annotations
Attributes
Diagrams
Facets
Instances
Properties
Source
Used by
Imported schema gml3.2Profile_diggs.xsd
Namespace http://www.opengis.net/gml/3.2
Annotations
GML Subset schema for
,PointPropertyType,CodeType,EngineeringDatum,CoordinateSystemAxis,CurvePropertyType,AbstractGML,AbstractFeature,MultiGeometryPropertyType,MultiPointPropertyType,AssociationAttributeGroup,ReferenceType,EngineeringDatumType,CoordinateSystemAxisType,AbstractGMLType,AbstractFeatureCollectionType,AbstractFeatureType,
written by gmlSubset.xslt.
Date 2012-06-29. Further valid restrictions made to this GML 3.2 profile for
DIGGS V2.0.a by David S. Burggraf (DSB), Galdos Systems. (look for changes following comments
with the text: 'DSB: restricted from profile'). All profile restrictions were validated in
accordance with GML 3.2 rules (ISO TC 211 19136 (2007), clauses 2.3 and 20). In particular,
the DIGGS schemas continue to validate against the full set of GML schemas (tested by
replacing all gml profile imports with the complete GML schema document wrapper,
gml.xsd)
Properties
attribute form default: unqualified
element form default: qualified
version: 3.2.1
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:Point
Namespace http://www.opengis.net/gml/3.2
Annotations
A Point is defined by a single coordinate tuple. The direct position of a point
is specified by the pos element which is of type DirectPositionType.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#SRSReferenceGroup 3_2.tmp#AbstractGeometryType 3_2.tmp#AbstractGeometricPrimitiveType 3_2.tmp#pos 3_2.tmp#PointType 3_2.tmp#AbstractGeometricPrimitive
Type gml:PointType
Type hierarchy
Properties
content: complex
Substitution Group Affiliation
Used by
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name* , (gml:pos)
Children gml:description, gml:descriptionReference, gml:identifier, gml:name, gml:pos
Instance
<gml:Point axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{0,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
  <gml:pos axisLabels="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:pos>
</gml:Point>
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="Point" type="gml:PointType" substitutionGroup="gml:AbstractGeometricPrimitive">
  <annotation>
    <documentation>A Point is defined by a single coordinate tuple. The direct position of a point is specified by the pos element which is of type DirectPositionType.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:description
Namespace http://www.opengis.net/gml/3.2
Annotations
The value of this property is a text description of the object. gml:description
uses gml:StringOrRefType as its content model, so it may contain a simple text string
content, or carry a reference to an external description. The use of gml:description to
reference an external description has been deprecated and replaced by the
gml:descriptionReference property.
Diagram
Diagram 3_2.tmp#AssociationAttributeGroup 3_2.tmp#StringOrRefType
Type gml:StringOrRefType
Properties
content: complex
Used by
Element Group gml:StandardObjectProperties
Complex Types diggs:AbstractBoreholeInsituTestType, diggs:AbstractCurveType, diggs:AbstractEventType, diggs:AbstractFeatureBaseType, diggs:AbstractFeatureType, diggs:AbstractGeometricAggregateType, diggs:AbstractGeometricPrimitiveType, diggs:AbstractGeometryType, diggs:AbstractGroupType, diggs:AbstractInsituTestType, diggs:AbstractInvestigationTargetType, diggs:AbstractLaboratoryTestType, diggs:AbstractLayerType, diggs:AbstractLinearSamplingFeatureType, diggs:AbstractMeasurementType, diggs:AbstractMetaDataType, diggs:AbstractMonitoringProcessType, diggs:AbstractNamedFeatureType, diggs:AbstractNamedLayerType, diggs:AbstractNamedObjectType, diggs:AbstractObjectBaseType, diggs:AbstractObjectType, diggs:AbstractPlanarSamplingFeatureType, diggs:AbstractPointSamplingFeatureType, diggs:AbstractSamplingFeatureType, diggs:AbstractSurfaceType, diggs:AbstractTestProcedureType, diggs:AddressType, diggs:AssociatedFileType, diggs:BackfillLayerType, diggs:BackfillType, diggs:BlockSampleDetailType, diggs:BoreholeDiameterType, diggs:BoreholeEventType, diggs:BoreholeType, diggs:BoundaryType, diggs:BusinessAssociateType, diggs:CalibrationType, diggs:CasingType, diggs:ChainOfCustodyEventType, diggs:ChiselingType, diggs:ColorLayerType, diggs:ColorType, diggs:ComponentLayerType, diggs:ComponentLithologyType, diggs:ComponentType, diggs:ConstituentType, diggs:ConstructionMethodType, diggs:ContractType, diggs:CylindricalSampleDetailType, diggs:DelayEventType, diggs:DescriptivePropertyType, diggs:DetectionLimitType, diggs:DetectorType, diggs:DiscontinuityLayerType, diggs:EnvironmentType, diggs:EquipmentType, diggs:FaceType, diggs:FlushType, diggs:FractureDescriptionType, diggs:FractureSpacingType, diggs:GroundType, diggs:GroupGroupType, diggs:LayerSystemType, diggs:LineStringType, diggs:LinearSpatialReferenceSystemType, diggs:LithologyLayerType, diggs:LithologyType, diggs:MeasureOrStringType, diggs:MonitoringResultType, diggs:MonitoringTimeType, diggs:MonitoringType, diggs:MultiCurveType, diggs:OrientationLayerType, diggs:OrientationType, diggs:OtherLayerType, diggs:ParameterType, diggs:ParticleDensityType, diggs:ParticleSizeDistributionType, diggs:ParticleSizeType, diggs:PlanarLayerRepresentationType, diggs:PointType, diggs:PolygonType, diggs:PostStrikeReadingType, diggs:ProjectGroupType, diggs:ProjectType, diggs:PropertyLayerType, diggs:PropertyType, diggs:SampleGroupType, diggs:SamplePreparationType, diggs:SampleProducedType, diggs:SampleType, diggs:SamplingActivityType, diggs:SamplingFeatureGroupType, diggs:SensorType, diggs:SimpleMultiPointType, diggs:SoftwareApplicationType, diggs:SpecificationType, diggs:StationType, diggs:StratigraphyLayerType, diggs:TestType, diggs:TimeIntervalType, diggs:TransectType, diggs:TrenchWallType, diggs:TrialPitEventType, diggs:TrialPitType, diggs:ValueAtTimeType, diggs:VectorLinearSpatialReferenceSystemType, diggs:WaterStrikeType, diggs:WellEventType, diggs:WellOpeningType, diggs:WellType, diggs_env:ChemicalAnalysisType, diggs_env:FiltrationType, diggs_env:PurgeType, diggs_env:SpectralAnalysisType, diggs_env:TICResultType, diggs_env:WaterLevelReadingType, diggs_geo:AggregateAbrasionValueTestType, diggs_geo:AggregateCrushingValueTestType, diggs_geo:AggregateImpactValueTestType, diggs_geo:AggregateLosAngelesAbrasionTestType, diggs_geo:AggregateSlakeDurabilityTestType, diggs_geo:AggregateSoundnessTestType, diggs_geo:AggregateTenPercentFinesTestType, diggs_geo:AtterbergLimitsTestType, diggs_geo:CationExchangeTestType, diggs_geo:ChalkCrushingValueTestType, diggs_geo:CompactionTestTrialsType, diggs_geo:CompactionTestType, diggs_geo:CompressiveStrengthTestType, diggs_geo:ConsolidationTestTrialsType, diggs_geo:ConsolidationTestType, diggs_geo:DirectShearTestTrialsType, diggs_geo:DirectShearTestType, diggs_geo:DriveSetType, diggs_geo:DrivenPenetrationTestType, diggs_geo:FlatDilatometerTestType, diggs_geo:FrostSusceptibilityTestType, diggs_geo:GradingType, diggs_geo:HandVaneTestType, diggs_geo:InsituCBRTestType, diggs_geo:InsituPermeabilityTestType, diggs_geo:InsituVaneTestType, diggs_geo:LabCBRTestTrialsType, diggs_geo:LabCBRTestType, diggs_geo:LabPermeabilityTestType, diggs_geo:LabVelocityTestType, diggs_geo:LinearShrinkageTestType, diggs_geo:MCVTestTrialsType, diggs_geo:MCVTestType, diggs_geo:ParticleSizeTestType, diggs_geo:PointLoadTestType, diggs_geo:PorePressureElementType, diggs_geo:PorewaterPressureMeasureType, diggs_geo:PressuremeterTestTrialsType, diggs_geo:PressuremeterTestType, diggs_geo:PumpingTestTrialsType, diggs_geo:PumpingTestType, diggs_geo:RedoxTestType, diggs_geo:RelativeDensityTestType, diggs_geo:RockPorosityDensityTestType, diggs_geo:SchmidtReboundHardnessTestType, diggs_geo:StaticConePenetrationTestType, diggs_geo:SuctionTestType, diggs_geo:WirelineLogType, glr:LinearSRSType, glrov:VectorOffsetLinearSRSType, gml:AbstractCRSType, gml:AbstractCoordinateSystemType, gml:AbstractDatumType, gml:AffineCSType, gml:CartesianCSType, gml:CoordinateSystemAxisType, gml:CylindricalCSType, gml:DefinitionBaseType, gml:DefinitionType, gml:EngineeringCRSType, gml:EngineeringDatumType, gml:IdentifiedObjectType, gml:LinearCSType, gml:PolarCSType, gml:SphericalCSType, gml:UserDefinedCSType
Attributes
QName Type Fixed Default Use Annotation
nilReason gml:NilReasonType optional
xlink:href xlink:hrefType optional
xlink:title xlink:titleAttrType optional
Source
<element name="description" type="gml:StringOrRefType">
  <annotation>
    <documentation>The value of this property is a text description of the object. gml:description uses gml:StringOrRefType as its content model, so it may contain a simple text string content, or carry a reference to an external description. The use of gml:description to reference an external description has been deprecated and replaced by the gml:descriptionReference property.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:descriptionReference
Namespace http://www.opengis.net/gml/3.2
Annotations
The value of this property is a remote text description of the object. The
xlink:href attribute of the gml:descriptionReference property references the external
description.
Diagram
Diagram 3_2.tmp#OwnershipAttributeGroup 3_2.tmp#AssociationAttributeGroup 3_2.tmp#ReferenceType
Type gml:ReferenceType
Properties
content: complex
Used by
Model
Attributes
QName Type Fixed Default Use Annotation
nilReason gml:NilReasonType optional
owns boolean false optional
xlink:href xlink:hrefType optional
xlink:title xlink:titleAttrType optional
Source
<element name="descriptionReference" type="gml:ReferenceType">
  <annotation>
    <documentation>The value of this property is a remote text description of the object. The xlink:href attribute of the gml:descriptionReference property references the external description.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:identifier
Namespace http://www.opengis.net/gml/3.2
Annotations
Often, a special identifier is assigned to an object by the maintaining
authority with the intention that it is used in references to the object For such cases, the
codeSpace shall be provided. That identifier is usually unique either globally or within an
application domain. gml:identifier is a pre-defined property for such
identifiers.
Diagram
Diagram NO_NAMESPACE.tmp#CodeType_codeSpace 3_2.tmp#CodeType NO_NAMESPACE.tmp#CodeWithAuthorityType_codeSpace 3_2.tmp#CodeWithAuthorityType
Type gml:CodeWithAuthorityType
Type hierarchy
Properties
content: complex
Used by
Attributes
QName Type Fixed Default Use Annotation
codeSpace anyURI required
Source
<element name="identifier" type="gml:CodeWithAuthorityType">
  <annotation>
    <documentation>Often, a special identifier is assigned to an object by the maintaining authority with the intention that it is used in references to the object For such cases, the codeSpace shall be provided. That identifier is usually unique either globally or within an application domain. gml:identifier is a pre-defined property for such identifiers.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:name
Namespace http://www.opengis.net/gml/3.2
Annotations
The gml:name property provides a label or identifier for the object, commonly a
descriptive name. An object may have several names, typically assigned by different
authorities. gml:name uses the gml:CodeType content model. The authority for a name is
indicated by the value of its (optional) codeSpace attribute. The name may or may not be
unique, as determined by the rules of the organization responsible for the codeSpace. In
common usage there will be one name per authority, so a processing application may select
the name from its preferred codeSpace.
Diagram
Diagram NO_NAMESPACE.tmp#CodeType_codeSpace 3_2.tmp#CodeType
Type gml:CodeType
Properties
content: complex
Used by
Attributes
QName Type Fixed Default Use Annotation
codeSpace anyURI optional
Source
<element name="name" type="gml:CodeType">
  <annotation>
    <documentation>The gml:name property provides a label or identifier for the object, commonly a descriptive name. An object may have several names, typically assigned by different authorities. gml:name uses the gml:CodeType content model. The authority for a name is indicated by the value of its (optional) codeSpace attribute. The name may or may not be unique, as determined by the rules of the organization responsible for the codeSpace. In common usage there will be one name per authority, so a processing application may select the name from its preferred codeSpace.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:pos
Namespace http://www.opengis.net/gml/3.2
Diagram
Diagram 3_2.tmp#doubleList 3_2.tmp#SRSReferenceGroup 3_2.tmp#DirectPositionType
Type gml:DirectPositionType
Type hierarchy
Properties
content: complex
Used by
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="pos" type="gml:DirectPositionType"/>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:AbstractGeometricPrimitive
Namespace http://www.opengis.net/gml/3.2
Annotations
The AbstractGeometricPrimitive element is the abstract head of the substitution
group for all (pre- and user-defined) geometric primitives.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#SRSReferenceGroup 3_2.tmp#AbstractGeometryType 3_2.tmp#AbstractGeometricPrimitiveType 3_2.tmp#AbstractCurve 3_2.tmp#AbstractSurface 3_2.tmp#Point 3_2.tmp#AbstractGeometry
Type gml:AbstractGeometricPrimitiveType
Type hierarchy
Properties
content: complex
abstract: true
Substitution Group
Substitution Group Affiliation
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name*
Children gml:description, gml:descriptionReference, gml:identifier, gml:name
Instance
<gml:AbstractGeometricPrimitive axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{0,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
</gml:AbstractGeometricPrimitive>
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="AbstractGeometricPrimitive" type="gml:AbstractGeometricPrimitiveType" abstract="true" substitutionGroup="gml:AbstractGeometry">
  <annotation>
    <documentation>The AbstractGeometricPrimitive element is the abstract head of the substitution group for all (pre- and user-defined) geometric primitives.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:AbstractGeometry
Namespace http://www.opengis.net/gml/3.2
Annotations
The AbstractGeometry element is the abstract head of the substitution group for
all geometry elements of GML. This includes pre-defined and user-defined geometry elements.
Any geometry element shall be a direct or indirect extension/restriction of
AbstractGeometryType and shall be directly or indirectly in the substitution group of
AbstractGeometry.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#SRSReferenceGroup 3_2.tmp#AbstractGeometryType 3_2.tmp#AbstractGeometricAggregate 3_2.tmp#AbstractGeometricPrimitive 2_0_a.tmp#http___schemas.diggsml.com_2.0.a_AbstractGeometry 3_2.tmp#AbstractImplicitGeometry 3_2.tmp#AbstractGML
Type gml:AbstractGeometryType
Type hierarchy
Properties
content: complex
abstract: true
Substitution Group
Substitution Group Affiliation
Used by
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name*
Children gml:description, gml:descriptionReference, gml:identifier, gml:name
Instance
<gml:AbstractGeometry axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{0,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
</gml:AbstractGeometry>
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="AbstractGeometry" type="gml:AbstractGeometryType" abstract="true" substitutionGroup="gml:AbstractGML">
  <annotation>
    <documentation>The AbstractGeometry element is the abstract head of the substitution group for all geometry elements of GML. This includes pre-defined and user-defined geometry elements. Any geometry element shall be a direct or indirect extension/restriction of AbstractGeometryType and shall be directly or indirectly in the substitution group of AbstractGeometry.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:AbstractGML
Namespace http://www.opengis.net/gml/3.2
Annotations
The abstract element gml:AbstractGML is “any GML object having identity”. It
acts as the head of an XML Schema substitution group, which may include any element which is
a GML feature, or other object, with identity. This is used as a variable in content models
in GML core and application schemas. It is effectively an abstract superclass for all GML
objects.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#AbstractFeature 3_2.tmp#AbstractGeometry 2_0_a.tmp#http___schemas.diggsml.com_2.0.a_AbstractObject 2_0_a.tmp#AbstractObjectBase 2_0_a.tmp#Address 3_2.tmp#Definition 2_0_a.tmp#DetectionLimit lr.tmp#LinearReferencingMethod 2_0_a.tmp#MeasureOrString 2_0_a.tmp#Qualifier 2_0_a.tmp#SoftwareApplication environmental.tmp#WaterLevelReadingMeasurements 3_2.tmp#AbstractObject
Type gml:AbstractGMLType
Properties
content: complex
abstract: true
Substitution Group
Substitution Group Affiliation
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name*
Children gml:description, gml:descriptionReference, gml:identifier, gml:name
Instance
<gml:AbstractGML gml:id="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{0,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
</gml:AbstractGML>
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
Source
<element name="AbstractGML" type="gml:AbstractGMLType" abstract="true" substitutionGroup="gml:AbstractObject">
  <annotation>
    <documentation>The abstract element gml:AbstractGML is “any GML object having identity”. It acts as the head of an XML Schema substitution group, which may include any element which is a GML feature, or other object, with identity. This is used as a variable in content models in GML core and application schemas. It is effectively an abstract superclass for all GML objects.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:AbstractObject
Namespace http://www.opengis.net/gml/3.2
Annotations
This element has no type defined, and is therefore implicitly (according to the
rules of W3C XML Schema) an XML Schema anyType. It is used as the head of an XML Schema
substitution group which unifies complex content and certain simple content elements used
for datatypes in GML, including the gml:AbstractGML substitution group.
Diagram
Diagram 3_2.tmp#AbstractGML 3_2.tmp#AbstractRing 3_2.tmp#AbstractValue 3_2.tmp#CoverageMappingRule 3_2.tmp#DataBlock 3_2.tmp#GridFunction 3_2.tmp#coverageFunction
Properties
abstract: true
Substitution Group
Source
<element name="AbstractObject" abstract="true">
  <annotation>
    <documentation>This element has no type defined, and is therefore implicitly (according to the rules of W3C XML Schema) an XML Schema anyType. It is used as the head of an XML Schema substitution group which unifies complex content and certain simple content elements used for datatypes in GML, including the gml:AbstractGML substitution group.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:EngineeringDatum
Namespace http://www.opengis.net/gml/3.2
Annotations
gml:EngineeringDatum defines the origin of an engineering coordinate reference
system, and is used in a region around that origin. This origin may be fixed with respect to
the earth (such as a defined point at a construction site), or be a defined point on a
moving vehicle (such as on a ship or satellite).
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#DefinitionBaseType 3_2.tmp#remarks 3_2.tmp#DefinitionType 3_2.tmp#IdentifiedObjectType 3_2.tmp#domainOfValidity 3_2.tmp#scope 3_2.tmp#anchorDefinition 3_2.tmp#realizationEpoch 3_2.tmp#AbstractDatumType 3_2.tmp#EngineeringDatumType 3_2.tmp#AbstractDatum
Type gml:EngineeringDatumType
Type hierarchy
Properties
content: complex
Substitution Group Affiliation
Used by
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier , gml:name* , gml:remarks{0,1} , gml:domainOfValidity{0,1} , gml:scope+ , gml:anchorDefinition{0,1} , gml:realizationEpoch{0,1}
Children gml:anchorDefinition, gml:description, gml:descriptionReference, gml:domainOfValidity, gml:identifier, gml:name, gml:realizationEpoch, gml:remarks, gml:scope
Instance
<gml:EngineeringDatum gml:id="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{1,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
  <gml:remarks>{0,1}</gml:remarks>
  <gml:domainOfValidity xlink:href="" nilReason="" xlink:title="">{0,1}</gml:domainOfValidity>
  <gml:scope>{1,unbounded}</gml:scope>
  <gml:anchorDefinition codeSpace="">{0,1}</gml:anchorDefinition>
  <gml:realizationEpoch>{0,1}</gml:realizationEpoch>
</gml:EngineeringDatum>
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
Source
<element name="EngineeringDatum" type="gml:EngineeringDatumType" substitutionGroup="gml:AbstractDatum">
  <annotation>
    <documentation>gml:EngineeringDatum defines the origin of an engineering coordinate reference system, and is used in a region around that origin. This origin may be fixed with respect to the earth (such as a defined point at a construction site), or be a defined point on a moving vehicle (such as on a ship or satellite).</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:remarks
Namespace http://www.opengis.net/gml/3.2
Diagram
Diagram
Type string
Properties
content: simple
Used by
Source
<element name="remarks" type="string"/>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:domainOfValidity
Namespace http://www.opengis.net/gml/3.2
Annotations
The gml:domainOfValidity property implements an association role to an
EX_Extent object as encoded in ISO/TS 19139, either referencing or containing the definition
of that extent.
Diagram
Diagram 3_2.tmp#AssociationAttributeGroup
Properties
content: complex
Used by
Attributes
QName Type Fixed Default Use Annotation
nilReason gml:NilReasonType optional
xlink:href xlink:hrefType optional
xlink:title xlink:titleAttrType optional
Source
<element name="domainOfValidity">
  <annotation>
    <documentation>The gml:domainOfValidity property implements an association role to an EX_Extent object as encoded in ISO/TS 19139, either referencing or containing the definition of that extent.</documentation>
  </annotation>
  <complexType>
    <!--DSB: restricted from profile
			<sequence minOccurs="0">
				<element ref="gmd:EX_Extent"/>
			</sequence>
-->
    <attributeGroup ref="gml:AssociationAttributeGroup"/>
  </complexType>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:scope
Namespace http://www.opengis.net/gml/3.2
Annotations
The gml:scope property provides a description of the usage, or limitations of
usage, for which this CRS-related object is valid. If unknown, enter "not
known".
Diagram
Diagram
Type string
Properties
content: simple
Used by
Source
<element name="scope" type="string">
  <annotation>
    <documentation>The gml:scope property provides a description of the usage, or limitations of usage, for which this CRS-related object is valid. If unknown, enter "not known".</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:anchorDefinition
Namespace http://www.opengis.net/gml/3.2
Annotations
gml:anchorDefinition is a description, possibly including coordinates, of the
definition used to anchor the datum to the Earth. Also known as the "origin", especially for
engineering and image datums. The codeSpace attribute may be used to reference a source of
more detailed on this point or surface, or on a set of such descriptions. - For a geodetic
datum, this point is also known as the fundamental point, which is traditionally the point
where the relationship between geoid and ellipsoid is defined. In some cases, the
"fundamental point" may consist of a number of points. In those cases, the parameters
defining the geoid/ellipsoid relationship have been averaged for these points, and the
averages adopted as the datum definition. - For an engineering datum, the anchor definition
may be a physical point, or it may be a point with defined coordinates in another CRS.may -
For an image datum, the anchor definition is usually either the centre of the image or the
corner of the image. - For a temporal datum, this attribute is not defined. Instead of the
anchor definition, a temporal datum carries a separate time origin of type
DateTime.
Diagram
Diagram NO_NAMESPACE.tmp#CodeType_codeSpace 3_2.tmp#CodeType
Type gml:CodeType
Properties
content: complex
Used by
Attributes
QName Type Fixed Default Use Annotation
codeSpace anyURI optional
Source
<element name="anchorDefinition" type="gml:CodeType">
  <annotation>
    <documentation>gml:anchorDefinition is a description, possibly including coordinates, of the definition used to anchor the datum to the Earth. Also known as the "origin", especially for engineering and image datums. The codeSpace attribute may be used to reference a source of more detailed on this point or surface, or on a set of such descriptions. - For a geodetic datum, this point is also known as the fundamental point, which is traditionally the point where the relationship between geoid and ellipsoid is defined. In some cases, the "fundamental point" may consist of a number of points. In those cases, the parameters defining the geoid/ellipsoid relationship have been averaged for these points, and the averages adopted as the datum definition. - For an engineering datum, the anchor definition may be a physical point, or it may be a point with defined coordinates in another CRS.may - For an image datum, the anchor definition is usually either the centre of the image or the corner of the image. - For a temporal datum, this attribute is not defined. Instead of the anchor definition, a temporal datum carries a separate time origin of type DateTime.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:realizationEpoch
Namespace http://www.opengis.net/gml/3.2
Annotations
gml:realizationEpoch is the time after which this datum definition is valid.
See ISO 19111 Table 32 for details.
Diagram
Diagram
Type witsml:date
Properties
content: simple
Used by
Source
<element name="realizationEpoch" type="date">
  <annotation>
    <documentation>gml:realizationEpoch is the time after which this datum definition is valid. See ISO 19111 Table 32 for details.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:AbstractDatum
Namespace http://www.opengis.net/gml/3.2
Annotations
A gml:AbstractDatum specifies the relationship of a coordinate system to the
earth, thus creating a coordinate reference system. A datum uses a parameter or set of
parameters that determine the location of the origin of the coordinate reference system.
Each datum subtype may be associated with only specific types of coordinate systems. This
abstract complex type shall not be used, extended, or restricted, in a GML Application
Schema, to define a concrete subtype with a meaning equivalent to a concrete subtype
specified in this document.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#DefinitionBaseType 3_2.tmp#remarks 3_2.tmp#DefinitionType 3_2.tmp#IdentifiedObjectType 3_2.tmp#domainOfValidity 3_2.tmp#scope 3_2.tmp#anchorDefinition 3_2.tmp#realizationEpoch 3_2.tmp#AbstractDatumType 3_2.tmp#EngineeringDatum 3_2.tmp#Definition
Type gml:AbstractDatumType
Type hierarchy
Properties
content: complex
abstract: true
Substitution Group
Substitution Group Affiliation
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier , gml:name* , gml:remarks{0,1} , gml:domainOfValidity{0,1} , gml:scope+ , gml:anchorDefinition{0,1} , gml:realizationEpoch{0,1}
Children gml:anchorDefinition, gml:description, gml:descriptionReference, gml:domainOfValidity, gml:identifier, gml:name, gml:realizationEpoch, gml:remarks, gml:scope
Instance
<gml:AbstractDatum gml:id="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{1,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
  <gml:remarks>{0,1}</gml:remarks>
  <gml:domainOfValidity xlink:href="" nilReason="" xlink:title="">{0,1}</gml:domainOfValidity>
  <gml:scope>{1,unbounded}</gml:scope>
  <gml:anchorDefinition codeSpace="">{0,1}</gml:anchorDefinition>
  <gml:realizationEpoch>{0,1}</gml:realizationEpoch>
</gml:AbstractDatum>
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
Source
<element name="AbstractDatum" type="gml:AbstractDatumType" abstract="true" substitutionGroup="gml:Definition">
  <annotation>
    <documentation>A gml:AbstractDatum specifies the relationship of a coordinate system to the earth, thus creating a coordinate reference system. A datum uses a parameter or set of parameters that determine the location of the origin of the coordinate reference system. Each datum subtype may be associated with only specific types of coordinate systems. This abstract complex type shall not be used, extended, or restricted, in a GML Application Schema, to define a concrete subtype with a meaning equivalent to a concrete subtype specified in this document.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:Definition
Namespace http://www.opengis.net/gml/3.2
Annotations
The basic gml:Definition element specifies a definition, which can be included
in or referenced by a dictionary. The content model for a generic definition is a derivation
from gml:AbstractGMLType. The gml:description property element shall hold the definition if
this can be captured in a simple text string, or the gml:descriptionReference property
element may carry a link to a description elsewhere. The gml:identifier element shall
provide one identifier identifying this definition. The identifier shall be unique within
the dictionaries using this definition. The gml:name elements shall provide zero or more
terms and synonyms for which this is the definition. The gml:remarks element shall be used
to hold additional textual information that is not conceptually part of the definition but
is useful in understanding the definition.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#DefinitionBaseType 3_2.tmp#remarks 3_2.tmp#DefinitionType 3_2.tmp#AbstractCRS 3_2.tmp#AbstractCoordinateSystem 3_2.tmp#AbstractDatum 3_2.tmp#CoordinateSystemAxis lr.tmp#LinearSRS 3_2.tmp#AbstractGML
Type gml:DefinitionType
Type hierarchy
Properties
content: complex
Substitution Group
Substitution Group Affiliation
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier , gml:name* , gml:remarks{0,1}
Children gml:description, gml:descriptionReference, gml:identifier, gml:name, gml:remarks
Instance
<gml:Definition gml:id="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{1,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
  <gml:remarks>{0,1}</gml:remarks>
</gml:Definition>
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
Source
<element name="Definition" type="gml:DefinitionType" substitutionGroup="gml:AbstractGML">
  <annotation>
    <documentation>The basic gml:Definition element specifies a definition, which can be included in or referenced by a dictionary. The content model for a generic definition is a derivation from gml:AbstractGMLType. The gml:description property element shall hold the definition if this can be captured in a simple text string, or the gml:descriptionReference property element may carry a link to a description elsewhere. The gml:identifier element shall provide one identifier identifying this definition. The identifier shall be unique within the dictionaries using this definition. The gml:name elements shall provide zero or more terms and synonyms for which this is the definition. The gml:remarks element shall be used to hold additional textual information that is not conceptually part of the definition but is useful in understanding the definition.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:CoordinateSystemAxis
Namespace http://www.opengis.net/gml/3.2
Annotations
gml:CoordinateSystemAxis is a definition of a coordinate system
axis.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#DefinitionBaseType 3_2.tmp#remarks 3_2.tmp#DefinitionType 3_2.tmp#IdentifiedObjectType NO_NAMESPACE.tmp#CoordinateSystemAxisType_uom 3_2.tmp#axisAbbrev 3_2.tmp#axisDirection 3_2.tmp#minimumValue 3_2.tmp#maximumValue 3_2.tmp#rangeMeaning 3_2.tmp#CoordinateSystemAxisType 3_2.tmp#Definition
Type gml:CoordinateSystemAxisType
Type hierarchy
Properties
content: complex
Substitution Group Affiliation
Used by
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier , gml:name* , gml:remarks{0,1} , gml:axisAbbrev , gml:axisDirection , gml:minimumValue{0,1} , gml:maximumValue{0,1} , gml:rangeMeaning{0,1}
Children gml:axisAbbrev, gml:axisDirection, gml:description, gml:descriptionReference, gml:identifier, gml:maximumValue, gml:minimumValue, gml:name, gml:rangeMeaning, gml:remarks
Instance
<gml:CoordinateSystemAxis gml:id="" uom="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{1,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
  <gml:remarks>{0,1}</gml:remarks>
  <gml:axisAbbrev codeSpace="">{1,1}</gml:axisAbbrev>
  <gml:axisDirection codeSpace="">{1,1}</gml:axisDirection>
  <gml:minimumValue>{0,1}</gml:minimumValue>
  <gml:maximumValue>{0,1}</gml:maximumValue>
  <gml:rangeMeaning codeSpace="">{0,1}</gml:rangeMeaning>
</gml:CoordinateSystemAxis>
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
uom gml:UomIdentifier required
The uom attribute provides an identifier of the unit of measure used for
this coordinate system axis. The value of this coordinate in a coordinate tuple shall
be recorded using this unit of measure, whenever those coordinates use a coordinate
reference system that uses a coordinate system that uses this axis.
Source
<element name="CoordinateSystemAxis" type="gml:CoordinateSystemAxisType" substitutionGroup="gml:Definition">
  <annotation>
    <documentation>gml:CoordinateSystemAxis is a definition of a coordinate system axis.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:axisAbbrev
Namespace http://www.opengis.net/gml/3.2
Annotations
gml:axisAbbrev is the abbreviation used for this coordinate system axis; this
abbreviation is also used to identify the coordinates in the coordinate tuple. The codeSpace
attribute may reference a source of more information on a set of standardized abbreviations,
or on this abbreviation.
Diagram
Diagram NO_NAMESPACE.tmp#CodeType_codeSpace 3_2.tmp#CodeType
Type gml:CodeType
Properties
content: complex
Used by
Attributes
QName Type Fixed Default Use Annotation
codeSpace anyURI optional
Source
<element name="axisAbbrev" type="gml:CodeType">
  <annotation>
    <documentation>gml:axisAbbrev is the abbreviation used for this coordinate system axis; this abbreviation is also used to identify the coordinates in the coordinate tuple. The codeSpace attribute may reference a source of more information on a set of standardized abbreviations, or on this abbreviation.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:axisDirection
Namespace http://www.opengis.net/gml/3.2
Annotations
gml:axisDirection is the direction of this coordinate system axis (or in the
case of Cartesian projected coordinates, the direction of this coordinate system axis at the
origin). Within any set of coordinate system axes, only one of each pair of terms may be
used. For earth-fixed CRSs, this direction is often approximate and intended to provide a
human interpretable meaning to the axis. When a geodetic datum is used, the precise
directions of the axes may therefore vary slightly from this approximate direction. The
codeSpace attribute shall reference a source of information specifying the values and
meanings of all the allowed string values for this property.
Diagram
Diagram NO_NAMESPACE.tmp#CodeType_codeSpace 3_2.tmp#CodeType NO_NAMESPACE.tmp#CodeWithAuthorityType_codeSpace 3_2.tmp#CodeWithAuthorityType
Type gml:CodeWithAuthorityType
Type hierarchy
Properties
content: complex
Used by
Attributes
QName Type Fixed Default Use Annotation
codeSpace anyURI required
Source
<element name="axisDirection" type="gml:CodeWithAuthorityType">
  <annotation>
    <documentation>gml:axisDirection is the direction of this coordinate system axis (or in the case of Cartesian projected coordinates, the direction of this coordinate system axis at the origin). Within any set of coordinate system axes, only one of each pair of terms may be used. For earth-fixed CRSs, this direction is often approximate and intended to provide a human interpretable meaning to the axis. When a geodetic datum is used, the precise directions of the axes may therefore vary slightly from this approximate direction. The codeSpace attribute shall reference a source of information specifying the values and meanings of all the allowed string values for this property.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:minimumValue
Namespace http://www.opengis.net/gml/3.2
Annotations
The gml:minimumValue and gml:maximumValue properties allow the specification of
minimum and maximum value normally allowed for this axis, in the unit of measure for the
axis. For a continuous angular axis such as longitude, the values wrap-around at this value.
Also, values beyond this minimum/maximum can be used for specified purposes, such as in a
bounding box. A value of minus infinity shall be allowed for the gml:minimumValue element, a
value of plus infiniy for the gml:maximumValue element. If these elements are omitted, the
value is unspecified.
Diagram
Diagram
Type double
Properties
content: simple
Used by
Source
<element name="minimumValue" type="double">
  <annotation>
    <documentation>The gml:minimumValue and gml:maximumValue properties allow the specification of minimum and maximum value normally allowed for this axis, in the unit of measure for the axis. For a continuous angular axis such as longitude, the values wrap-around at this value. Also, values beyond this minimum/maximum can be used for specified purposes, such as in a bounding box. A value of minus infinity shall be allowed for the gml:minimumValue element, a value of plus infiniy for the gml:maximumValue element. If these elements are omitted, the value is unspecified.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:maximumValue
Namespace http://www.opengis.net/gml/3.2
Annotations
The gml:minimumValue and gml:maximumValue properties allow the specification of
minimum and maximum value normally allowed for this axis, in the unit of measure for the
axis. For a continuous angular axis such as longitude, the values wrap-around at this value.
Also, values beyond this minimum/maximum can be used for specified purposes, such as in a
bounding box. A value of minus infinity shall be allowed for the gml:minimumValue element, a
value of plus infiniy for the gml:maximumValue element. If these elements are omitted, the
value is unspecified.
Diagram
Diagram
Type double
Properties
content: simple
Used by
Source
<element name="maximumValue" type="double">
  <annotation>
    <documentation>The gml:minimumValue and gml:maximumValue properties allow the specification of minimum and maximum value normally allowed for this axis, in the unit of measure for the axis. For a continuous angular axis such as longitude, the values wrap-around at this value. Also, values beyond this minimum/maximum can be used for specified purposes, such as in a bounding box. A value of minus infinity shall be allowed for the gml:minimumValue element, a value of plus infiniy for the gml:maximumValue element. If these elements are omitted, the value is unspecified.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:rangeMeaning
Namespace http://www.opengis.net/gml/3.2
Annotations
gml:rangeMeaning describes the meaning of axis value range specified by
gml:minimumValue and gml:maximumValue. This element shall be omitted when both
gml:minimumValue and gml:maximumValue are omitted. This element should be included when
gml:minimumValue and/or gml:maximumValue are included. If this element is omitted when the
gml:minimumValue and/or gml:maximumValue are included, the meaning is unspecified. The
codeSpace attribute shall reference a source of information specifying the values and
meanings of all the allowed string values for this property.
Diagram
Diagram NO_NAMESPACE.tmp#CodeType_codeSpace 3_2.tmp#CodeType NO_NAMESPACE.tmp#CodeWithAuthorityType_codeSpace 3_2.tmp#CodeWithAuthorityType
Type gml:CodeWithAuthorityType
Type hierarchy
Properties
content: complex
Used by
Attributes
QName Type Fixed Default Use Annotation
codeSpace anyURI required
Source
<element name="rangeMeaning" type="gml:CodeWithAuthorityType">
  <annotation>
    <documentation>gml:rangeMeaning describes the meaning of axis value range specified by gml:minimumValue and gml:maximumValue. This element shall be omitted when both gml:minimumValue and gml:maximumValue are omitted. This element should be included when gml:minimumValue and/or gml:maximumValue are included. If this element is omitted when the gml:minimumValue and/or gml:maximumValue are included, the meaning is unspecified. The codeSpace attribute shall reference a source of information specifying the values and meanings of all the allowed string values for this property.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:AbstractCurve
Namespace http://www.opengis.net/gml/3.2
Annotations
The AbstractCurve element is the abstract head of the substitution group for
all (continuous) curve elements.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#SRSReferenceGroup 3_2.tmp#AbstractGeometryType 3_2.tmp#AbstractGeometricPrimitiveType 3_2.tmp#AbstractCurveType 3_2.tmp#CompositeCurve 3_2.tmp#LineString 3_2.tmp#OrientableCurve 3_2.tmp#AbstractGeometricPrimitive
Type gml:AbstractCurveType
Type hierarchy
Properties
content: complex
abstract: true
Substitution Group
Substitution Group Affiliation
Used by
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name*
Children gml:description, gml:descriptionReference, gml:identifier, gml:name
Instance
<gml:AbstractCurve axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{0,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
</gml:AbstractCurve>
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="AbstractCurve" type="gml:AbstractCurveType" abstract="true" substitutionGroup="gml:AbstractGeometricPrimitive">
  <annotation>
    <documentation>The AbstractCurve element is the abstract head of the substitution group for all (continuous) curve elements.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:AbstractFeature
Namespace http://www.opengis.net/gml/3.2
Annotations
This abstract element serves as the head of a substitution group which may
contain any elements whose content model is derived from gml:AbstractFeatureType. This may
be used as a variable in the construction of content models. gml:AbstractFeature may be
thought of as “anything that is a GML feature” and may be used to define variables or
templates in which the value of a GML property is “any feature”. This occurs in particular
in a GML feature collection where the feature member properties contain one or multiple
copies of gml:AbstractFeature respectively.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#AbstractFeatureType 3_2.tmp#AbstractCoverage 2_0_a.tmp#AbstractFeatureBase 2_0_a.tmp#Diggs 3_2.tmp#AbstractGML
Type gml:AbstractFeatureType
Type hierarchy
Properties
content: complex
abstract: true
Substitution Group
Substitution Group Affiliation
Used by
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name*
Children gml:description, gml:descriptionReference, gml:identifier, gml:name
Instance
<gml:AbstractFeature gml:id="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{0,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
</gml:AbstractFeature>
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
Source
<element name="AbstractFeature" type="gml:AbstractFeatureType" abstract="true" substitutionGroup="gml:AbstractGML">
  <annotation>
    <documentation>This abstract element serves as the head of a substitution group which may contain any elements whose content model is derived from gml:AbstractFeatureType. This may be used as a variable in the construction of content models. gml:AbstractFeature may be thought of as “anything that is a GML feature” and may be used to define variables or templates in which the value of a GML property is “any feature”. This occurs in particular in a GML feature collection where the feature member properties contain one or multiple copies of gml:AbstractFeature respectively.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:EnvelopeType / gml:lowerCorner
Namespace http://www.opengis.net/gml/3.2
Diagram
Diagram 3_2.tmp#doubleList 3_2.tmp#SRSReferenceGroup 3_2.tmp#DirectPositionType
Type gml:DirectPositionType
Type hierarchy
Properties
content: complex
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="lowerCorner" type="gml:DirectPositionType"/>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:EnvelopeType / gml:upperCorner
Namespace http://www.opengis.net/gml/3.2
Diagram
Diagram 3_2.tmp#doubleList 3_2.tmp#SRSReferenceGroup 3_2.tmp#DirectPositionType
Type gml:DirectPositionType
Type hierarchy
Properties
content: complex
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="upperCorner" type="gml:DirectPositionType"/>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:geometryMember
Namespace http://www.opengis.net/gml/3.2
Annotations
This property element either references a geometry element via the
XLink-attributes or contains the geometry element.
Diagram
Diagram 3_2.tmp#AssociationAttributeGroup 3_2.tmp#OwnershipAttributeGroup 3_2.tmp#AbstractGeometry 3_2.tmp#GeometryPropertyType
Type gml:GeometryPropertyType
Properties
content: complex
Used by
Complex Type gml:MultiGeometryType
Model gml:AbstractGeometry
Children gml:AbstractGeometry
Instance
<gml:geometryMember xlink:href="" nilReason="" owns="false" xlink:title="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:AbstractGeometry axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:AbstractGeometry>
</gml:geometryMember>
Attributes
QName Type Fixed Default Use Annotation
nilReason gml:NilReasonType optional
owns boolean false optional
xlink:href xlink:hrefType optional
xlink:title xlink:titleAttrType optional
Source
<element name="geometryMember" type="gml:GeometryPropertyType">
  <annotation>
    <documentation>This property element either references a geometry element via the XLink-attributes or contains the geometry element.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:geometryMembers
Namespace http://www.opengis.net/gml/3.2
Annotations
This property element contains a list of geometry elements. The order of the
elements is significant and shall be preserved when processing the array.
Diagram
Diagram 3_2.tmp#OwnershipAttributeGroup 3_2.tmp#AbstractGeometry 3_2.tmp#GeometryArrayPropertyType
Type gml:GeometryArrayPropertyType
Properties
content: complex
Used by
Complex Type gml:MultiGeometryType
Model gml:AbstractGeometry
Children gml:AbstractGeometry
Instance
<gml:geometryMembers owns="false" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:AbstractGeometry axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:AbstractGeometry>
</gml:geometryMembers>
Attributes
QName Type Fixed Default Use Annotation
owns boolean false optional
Source
<element name="geometryMembers" type="gml:GeometryArrayPropertyType">
  <annotation>
    <documentation>This property element contains a list of geometry elements. The order of the elements is significant and shall be preserved when processing the array.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:MultiGeometry
Namespace http://www.opengis.net/gml/3.2
Annotations
gml:MultiGeometry is a collection of one or more GML geometry objects of
arbitrary type. The members of the geometric aggregate may be specified either using the
"standard" property (gml:geometryMember) or the array property (gml:geometryMembers). It is
also valid to use both the "standard" and the array properties in the same
collection.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#SRSReferenceGroup 3_2.tmp#AbstractGeometryType 3_2.tmp#AggregationAttributeGroup 3_2.tmp#AbstractGeometricAggregateType 3_2.tmp#geometryMember 3_2.tmp#geometryMembers 3_2.tmp#MultiGeometryType 3_2.tmp#AbstractGeometricAggregate
Type gml:MultiGeometryType
Type hierarchy
Properties
content: complex
Substitution Group Affiliation
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name* , gml:geometryMember* , gml:geometryMembers{0,1}
Children gml:description, gml:descriptionReference, gml:geometryMember, gml:geometryMembers, gml:identifier, gml:name
Instance
<gml:MultiGeometry aggregationType="" axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{0,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
  <gml:geometryMember xlink:href="" nilReason="" owns="false" xlink:title="">{0,unbounded}</gml:geometryMember>
  <gml:geometryMembers owns="false">{0,1}</gml:geometryMembers>
</gml:MultiGeometry>
Attributes
QName Type Fixed Default Use Annotation
aggregationType gml:AggregationType optional
axisLabels gml:NCNameList optional
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="MultiGeometry" type="gml:MultiGeometryType" substitutionGroup="gml:AbstractGeometricAggregate">
  <annotation>
    <documentation>gml:MultiGeometry is a collection of one or more GML geometry objects of arbitrary type. The members of the geometric aggregate may be specified either using the "standard" property (gml:geometryMember) or the array property (gml:geometryMembers). It is also valid to use both the "standard" and the array properties in the same collection.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:AbstractGeometricAggregate
Namespace http://www.opengis.net/gml/3.2
Annotations
gml:AbstractGeometricAggregate is the abstract head of the substitution group
for all geometric aggregates.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#SRSReferenceGroup 3_2.tmp#AbstractGeometryType 3_2.tmp#AggregationAttributeGroup 3_2.tmp#AbstractGeometricAggregateType 3_2.tmp#MultiCurve 3_2.tmp#MultiGeometry 3_2.tmp#MultiPoint 3_2.tmp#MultiSurface ce.tmp#SimpleMultiPoint 3_2.tmp#AbstractGeometry
Type gml:AbstractGeometricAggregateType
Type hierarchy
Properties
content: complex
abstract: true
Substitution Group
Substitution Group Affiliation
Used by
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name*
Children gml:description, gml:descriptionReference, gml:identifier, gml:name
Instance
<gml:AbstractGeometricAggregate aggregationType="" axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{0,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
</gml:AbstractGeometricAggregate>
Attributes
QName Type Fixed Default Use Annotation
aggregationType gml:AggregationType optional
axisLabels gml:NCNameList optional
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="AbstractGeometricAggregate" type="gml:AbstractGeometricAggregateType" abstract="true" substitutionGroup="gml:AbstractGeometry">
  <annotation>
    <documentation>gml:AbstractGeometricAggregate is the abstract head of the substitution group for all geometric aggregates.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:MultiPoint
Namespace http://www.opengis.net/gml/3.2
Annotations
A gml:MultiPoint consists of one or more gml:Points. The members of the
geometric aggregate may be specified either using the "standard" property (gml:pointMember)
or the array property (gml:pointMembers). It is also valid to use both the "standard" and
the array properties in the same collection.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#SRSReferenceGroup 3_2.tmp#AbstractGeometryType 3_2.tmp#AggregationAttributeGroup 3_2.tmp#AbstractGeometricAggregateType 3_2.tmp#pointMember 3_2.tmp#pointMembers 3_2.tmp#MultiPointType 3_2.tmp#AbstractGeometricAggregate
Type gml:MultiPointType
Type hierarchy
Properties
content: complex
Substitution Group Affiliation
Used by
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name* , gml:pointMember* , gml:pointMembers{0,1}
Children gml:description, gml:descriptionReference, gml:identifier, gml:name, gml:pointMember, gml:pointMembers
Instance
<gml:MultiPoint aggregationType="" axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{0,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
  <gml:pointMember xlink:href="" nilReason="" owns="false" xlink:title="">{0,unbounded}</gml:pointMember>
  <gml:pointMembers owns="false">{0,1}</gml:pointMembers>
</gml:MultiPoint>
Attributes
QName Type Fixed Default Use Annotation
aggregationType gml:AggregationType optional
axisLabels gml:NCNameList optional
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="MultiPoint" type="gml:MultiPointType" substitutionGroup="gml:AbstractGeometricAggregate">
  <annotation>
    <documentation>A gml:MultiPoint consists of one or more gml:Points. The members of the geometric aggregate may be specified either using the "standard" property (gml:pointMember) or the array property (gml:pointMembers). It is also valid to use both the "standard" and the array properties in the same collection.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:pointMember
Namespace http://www.opengis.net/gml/3.2
Annotations
This property element either references a Point via the XLink-attributes or
contains the Point element.
Diagram
Diagram 3_2.tmp#AssociationAttributeGroup 3_2.tmp#OwnershipAttributeGroup 3_2.tmp#Point 3_2.tmp#PointPropertyType
Type gml:PointPropertyType
Properties
content: complex
Used by
Complex Type gml:MultiPointType
Model gml:Point
Children gml:Point
Instance
<gml:pointMember xlink:href="" nilReason="" owns="false" xlink:title="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:Point axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:Point>
</gml:pointMember>
Attributes
QName Type Fixed Default Use Annotation
nilReason gml:NilReasonType optional
owns boolean false optional
xlink:href xlink:hrefType optional
xlink:title xlink:titleAttrType optional
Source
<element name="pointMember" type="gml:PointPropertyType">
  <annotation>
    <documentation>This property element either references a Point via the XLink-attributes or contains the Point element.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:pointMembers
Namespace http://www.opengis.net/gml/3.2
Annotations
This property element contains a list of points. The order of the elements is
significant and shall be preserved when processing the array.
Diagram
Diagram 3_2.tmp#OwnershipAttributeGroup 3_2.tmp#Point 3_2.tmp#PointArrayPropertyType
Type gml:PointArrayPropertyType
Properties
content: complex
Used by
Complex Type gml:MultiPointType
Model gml:Point
Children gml:Point
Instance
<gml:pointMembers owns="false" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:Point axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:Point>
</gml:pointMembers>
Attributes
QName Type Fixed Default Use Annotation
owns boolean false optional
Source
<element name="pointMembers" type="gml:PointArrayPropertyType">
  <annotation>
    <documentation>This property element contains a list of points. The order of the elements is significant and shall be preserved when processing the array.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:curveMember
Namespace http://www.opengis.net/gml/3.2
Annotations
Restricted in this profile to eliminate infinite recursion - e.g. disallow
curveMember/CompositeCurve/curveMember/OrientableCurve/baseCurve/CompositeCurve/curveMember/...
Diagram
Diagram 3_2.tmp#AssociationAttributeGroup 3_2.tmp#OwnershipAttributeGroup 3_2.tmp#LineString 3_2.tmp#OrientableCurve
Properties
content: complex
Used by
Model (gml:LineString | gml:OrientableCurve)
Children gml:LineString, gml:OrientableCurve
Instance
<gml:curveMember xlink:href="" nilReason="" owns="false" xlink:title="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:LineString axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:LineString>
  <gml:OrientableCurve axisLabels="" gml:id="" orientation="+" srsDimension="" srsName="" uomLabels="">{1,1}</gml:OrientableCurve>
</gml:curveMember>
Attributes
QName Type Fixed Default Use Annotation
nilReason gml:NilReasonType optional
owns boolean false optional
xlink:href xlink:hrefType optional
xlink:title xlink:titleAttrType optional
Source
<element name="curveMember">
  <annotation>
    <documentation>Restricted in this profile to eliminate infinite recursion - e.g. disallow curveMember/CompositeCurve/curveMember/OrientableCurve/baseCurve/CompositeCurve/curveMember/...</documentation>
  </annotation>
  <complexType>
    <annotation>
      <documentation>A property that has a LineString as its value domain or an XLink reference to a remote LineString element (where remote includes the LineString element located elsewhere in the same document). Either the reference or the contained element shall be given, but neither both nor none.</documentation>
    </annotation>
    <sequence minOccurs="0">
      <choice>
        <element ref="gml:LineString"/>
        <element ref="gml:OrientableCurve"/>
      </choice>
    </sequence>
    <attributeGroup ref="gml:AssociationAttributeGroup"/>
    <attributeGroup ref="gml:OwnershipAttributeGroup"/>
  </complexType>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:LineString
Namespace http://www.opengis.net/gml/3.2
Annotations
A LineString is a special curve that consists of a single segment with linear
interpolation. It is defined by two or more coordinate tuples, with linear interpolation
between them. The number of direct positions in the list shall be at least
two.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#SRSReferenceGroup 3_2.tmp#AbstractGeometryType 3_2.tmp#AbstractGeometricPrimitiveType 3_2.tmp#AbstractCurveType 3_2.tmp#pos 3_2.tmp#pointProperty 3_2.tmp#posList 3_2.tmp#LineStringType 3_2.tmp#AbstractCurve
Type gml:LineStringType
Type hierarchy
Properties
content: complex
Substitution Group Affiliation
Used by
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name* , (gml:pos | gml:pointProperty | gml:posList)
Children gml:description, gml:descriptionReference, gml:identifier, gml:name, gml:pointProperty, gml:pos, gml:posList
Instance
<gml:LineString axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{0,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
  <gml:pos axisLabels="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:pos>
  <gml:pointProperty xlink:href="" nilReason="" owns="false" xlink:title="">{1,1}</gml:pointProperty>
  <gml:posList axisLabels="" count="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:posList>
</gml:LineString>
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="LineString" type="gml:LineStringType" substitutionGroup="gml:AbstractCurve">
  <annotation>
    <documentation>A LineString is a special curve that consists of a single segment with linear interpolation. It is defined by two or more coordinate tuples, with linear interpolation between them. The number of direct positions in the list shall be at least two.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:pointProperty
Namespace http://www.opengis.net/gml/3.2
Annotations
This property element either references a point via the XLink-attributes or
contains the point element. pointProperty is the predefined property which may be used by
GML Application Schemas whenever a GML feature has a property with a value that is
substitutable for Point.
Diagram
Diagram 3_2.tmp#AssociationAttributeGroup 3_2.tmp#OwnershipAttributeGroup 3_2.tmp#Point 3_2.tmp#PointPropertyType
Type gml:PointPropertyType
Properties
content: complex
Used by
Model gml:Point
Children gml:Point
Instance
<gml:pointProperty xlink:href="" nilReason="" owns="false" xlink:title="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:Point axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:Point>
</gml:pointProperty>
Attributes
QName Type Fixed Default Use Annotation
nilReason gml:NilReasonType optional
owns boolean false optional
xlink:href xlink:hrefType optional
xlink:title xlink:titleAttrType optional
Source
<element name="pointProperty" type="gml:PointPropertyType">
  <annotation>
    <documentation>This property element either references a point via the XLink-attributes or contains the point element. pointProperty is the predefined property which may be used by GML Application Schemas whenever a GML feature has a property with a value that is substitutable for Point.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:posList
Namespace http://www.opengis.net/gml/3.2
Diagram
Diagram 3_2.tmp#doubleList 3_2.tmp#SRSReferenceGroup NO_NAMESPACE.tmp#DirectPositionListType_count 3_2.tmp#DirectPositionListType
Type gml:DirectPositionListType
Type hierarchy
Properties
content: complex
Used by
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
count positiveInteger optional
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="posList" type="gml:DirectPositionListType"/>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:OrientableCurve
Namespace http://www.opengis.net/gml/3.2
Annotations
OrientableCurve consists of a curve and an orientation. If the orientation is
"+", then the OrientableCurve is identical to the baseCurve. If the orientation is "-", then
the OrientableCurve is related to another AbstractCurve with a parameterization that
reverses the sense of the curve traversal.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#SRSReferenceGroup 3_2.tmp#AbstractGeometryType 3_2.tmp#AbstractGeometricPrimitiveType 3_2.tmp#AbstractCurveType NO_NAMESPACE.tmp#OrientableCurveType_orientation 3_2.tmp#baseCurve 3_2.tmp#OrientableCurveType 3_2.tmp#AbstractCurve
Type gml:OrientableCurveType
Type hierarchy
Properties
content: complex
Substitution Group Affiliation
Used by
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name* , gml:baseCurve
Children gml:baseCurve, gml:description, gml:descriptionReference, gml:identifier, gml:name
Instance
<gml:OrientableCurve axisLabels="" gml:id="" orientation="+" srsDimension="" srsName="" uomLabels="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{0,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
  <gml:baseCurve xlink:href="" nilReason="" owns="false" xlink:title="">{1,1}</gml:baseCurve>
</gml:OrientableCurve>
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
orientation gml:SignType + optional
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="OrientableCurve" type="gml:OrientableCurveType" substitutionGroup="gml:AbstractCurve">
  <annotation>
    <documentation>OrientableCurve consists of a curve and an orientation. If the orientation is "+", then the OrientableCurve is identical to the baseCurve. If the orientation is "-", then the OrientableCurve is related to another AbstractCurve with a parameterization that reverses the sense of the curve traversal.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:baseCurve
Namespace http://www.opengis.net/gml/3.2
Annotations
Restricted in this profile to eliminate infinite recursion - e.g. disallow
baseCurve/OrientableCurve/baseCurve/OrientableCurve/baseCurve/OrientableCurve/...
Diagram
Diagram 3_2.tmp#AssociationAttributeGroup 3_2.tmp#OwnershipAttributeGroup 3_2.tmp#LineString
Properties
content: complex
Used by
Model gml:LineString
Children gml:LineString
Instance
<gml:baseCurve xlink:href="" nilReason="" owns="false" xlink:title="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:LineString axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:LineString>
</gml:baseCurve>
Attributes
QName Type Fixed Default Use Annotation
nilReason gml:NilReasonType optional
owns boolean false optional
xlink:href xlink:hrefType optional
xlink:title xlink:titleAttrType optional
Source
<element name="baseCurve">
  <annotation>
    <documentation>Restricted in this profile to eliminate infinite recursion - e.g. disallow baseCurve/OrientableCurve/baseCurve/OrientableCurve/baseCurve/OrientableCurve/...</documentation>
  </annotation>
  <complexType>
    <annotation>
      <documentation>A property that has a LineString as its value domain or an XLink reference to a remote LineString element (where remote includes the LineString element located elsewhere in the same document). Either the reference or the contained element shall be given, but neither both nor none.</documentation>
    </annotation>
    <sequence minOccurs="0">
      <element ref="gml:LineString"/>
    </sequence>
    <attributeGroup ref="gml:AssociationAttributeGroup"/>
    <attributeGroup ref="gml:OwnershipAttributeGroup"/>
  </complexType>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:curveMembers
Namespace http://www.opengis.net/gml/3.2
Annotations
Restricted in this profile to eliminate infinite recursion - e.g. disallow
curveMembers/CompositeCurve/curveMember/OrientableCurve/baseCurve/CompositeCurve/curveMember/...
Diagram
Diagram 3_2.tmp#OwnershipAttributeGroup 3_2.tmp#LineString 3_2.tmp#OrientableCurve
Properties
content: complex
Used by
Complex Type gml:MultiCurveType
Model (gml:LineString | gml:OrientableCurve)
Children gml:LineString, gml:OrientableCurve
Instance
<gml:curveMembers owns="false" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:LineString axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:LineString>
  <gml:OrientableCurve axisLabels="" gml:id="" orientation="+" srsDimension="" srsName="" uomLabels="">{1,1}</gml:OrientableCurve>
</gml:curveMembers>
Attributes
QName Type Fixed Default Use Annotation
owns boolean false optional
Source
<element name="curveMembers">
  <annotation>
    <documentation>Restricted in this profile to eliminate infinite recursion - e.g. disallow curveMembers/CompositeCurve/curveMember/OrientableCurve/baseCurve/CompositeCurve/curveMember/...</documentation>
  </annotation>
  <complexType>
    <annotation>
      <documentation>A container for an array of LineStrings. The LineString elements are always contained inline in the array property, referencing geometry elements or arrays of geometry elements via XLinks is not supported.</documentation>
    </annotation>
    <sequence minOccurs="0" maxOccurs="unbounded">
      <choice>
        <element ref="gml:LineString"/>
        <element ref="gml:OrientableCurve"/>
      </choice>
    </sequence>
    <attributeGroup ref="gml:OwnershipAttributeGroup"/>
  </complexType>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:MultiCurve
Namespace http://www.opengis.net/gml/3.2
Annotations
A gml:MultiCurve is defined by one or more gml:AbstractCurves. The members of
the geometric aggregate may be specified either using the "standard" property
(gml:curveMember) or the array property (gml:curveMembers). It is also valid to use both the
"standard" and the array properties in the same collection.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#SRSReferenceGroup 3_2.tmp#AbstractGeometryType 3_2.tmp#AggregationAttributeGroup 3_2.tmp#AbstractGeometricAggregateType 3_2.tmp#curveMember 3_2.tmp#curveMembers 3_2.tmp#MultiCurveType 3_2.tmp#AbstractGeometricAggregate
Type gml:MultiCurveType
Type hierarchy
Properties
content: complex
Substitution Group Affiliation
Used by
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name* , gml:curveMember* , gml:curveMembers{0,1}
Children gml:curveMember, gml:curveMembers, gml:description, gml:descriptionReference, gml:identifier, gml:name
Instance
<gml:MultiCurve aggregationType="" axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{0,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
  <gml:curveMember xlink:href="" nilReason="" owns="false" xlink:title="">{0,unbounded}</gml:curveMember>
  <gml:curveMembers owns="false">{0,1}</gml:curveMembers>
</gml:MultiCurve>
Attributes
QName Type Fixed Default Use Annotation
aggregationType gml:AggregationType optional
axisLabels gml:NCNameList optional
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="MultiCurve" type="gml:MultiCurveType" substitutionGroup="gml:AbstractGeometricAggregate">
  <annotation>
    <documentation>A gml:MultiCurve is defined by one or more gml:AbstractCurves. The members of the geometric aggregate may be specified either using the "standard" property (gml:curveMember) or the array property (gml:curveMembers). It is also valid to use both the "standard" and the array properties in the same collection.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:surfaceMember
Namespace http://www.opengis.net/gml/3.2
Annotations
Restricted in this profile to eliminate infinite recursion
Diagram
Diagram 3_2.tmp#AssociationAttributeGroup 3_2.tmp#OwnershipAttributeGroup 3_2.tmp#Polygon
Properties
content: complex
Used by
Model gml:Polygon
Children gml:Polygon
Instance
<gml:surfaceMember xlink:href="" nilReason="" owns="false" xlink:title="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:Polygon axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:Polygon>
</gml:surfaceMember>
Attributes
QName Type Fixed Default Use Annotation
nilReason gml:NilReasonType optional
owns boolean false optional
xlink:href xlink:hrefType optional
xlink:title xlink:titleAttrType optional
Source
<element name="surfaceMember">
  <annotation>
    <documentation>Restricted in this profile to eliminate infinite recursion</documentation>
  </annotation>
  <complexType>
    <annotation>
      <documentation>This property element either references a gml:Polygon via the XLink-attributes or contains the gml:Polygon element inline.</documentation>
    </annotation>
    <sequence minOccurs="0">
      <element ref="gml:Polygon"/>
    </sequence>
    <attributeGroup ref="gml:AssociationAttributeGroup"/>
    <attributeGroup ref="gml:OwnershipAttributeGroup"/>
  </complexType>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:Polygon
Namespace http://www.opengis.net/gml/3.2
Annotations
A Polygon is a special surface that is defined by a single surface patch (see
D.3.6). The boundary of this patch is coplanar and the polygon uses planar interpolation in
its interior. The elements exterior and interior describe the surface boundary of the
polygon.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#SRSReferenceGroup 3_2.tmp#AbstractGeometryType 3_2.tmp#AbstractGeometricPrimitiveType 3_2.tmp#AbstractSurfaceType 3_2.tmp#exterior 3_2.tmp#PolygonType 3_2.tmp#AbstractSurface
Type gml:PolygonType
Type hierarchy
Properties
content: complex
Substitution Group Affiliation
Used by
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name* , gml:exterior{0,1}
Children gml:description, gml:descriptionReference, gml:exterior, gml:identifier, gml:name
Instance
<gml:Polygon axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">{0,1}</gml:identifier>
  <gml:name codeSpace="">{0,unbounded}</gml:name>
  <gml:exterior>{0,1}</gml:exterior>
</gml:Polygon>
Attributes
QName Type Fixed Default Use Annotation
axisLabels gml:NCNameList optional
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be
unique in the XML document within which it occurs. An external identifier for the object in
the form of a URI may be constructed using standard XML and XPointer methods. This is done
by concatenating the URI for the document, a fragment separator, and the value of the id
attribute.
srsDimension positiveInteger optional
srsName anyURI optional
uomLabels gml:NCNameList optional
Source
<element name="Polygon" type="gml:PolygonType" substitutionGroup="gml:AbstractSurface">
  <annotation>
    <documentation>A Polygon is a special surface that is defined by a single surface patch (see D.3.6). The boundary of this patch is coplanar and the polygon uses planar interpolation in its interior. The elements exterior and interior describe the surface boundary of the polygon.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:exterior
Namespace http://www.opengis.net/gml/3.2
Annotations
A boundary of a surface consists of a number of rings. In the normal 2D case,
one of these rings is distinguished as being the exterior boundary. In a general manifold
this is not always possible, in which case all boundaries shall be listed as interior
boundaries, and the exterior will be empty.
Diagram
Diagram 3_2.tmp#AbstractRing 3_2.tmp#AbstractRingPropertyType
Type gml:AbstractRingPropertyType
Properties
content: complex
Used by
Model gml:AbstractRing
Children gml:AbstractRing
Instance
<gml:exterior xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:AbstractRing>{1,1}</gml:AbstractRing>
</gml:exterior>
Source
<element name="exterior" type="gml:AbstractRingPropertyType">
  <annotation>
    <documentation>A boundary of a surface consists of a number of rings. In the normal 2D case, one of these rings is distinguished as being the exterior boundary. In a general manifold this is not always possible, in which case all boundaries shall be listed as interior boundaries, and the exterior will be empty.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:AbstractRing
Namespace http://www.opengis.net/gml/3.2
Annotations
An abstraction of a ring to support surface boundaries of different complexity.
The AbstractRing element is the abstract head of the substituition group for all closed
boundaries of a surface patch.
Diagram
Diagram 3_2.tmp#AbstractRingType 3_2.tmp#LinearRing 3_2.tmp#Ring 3_2.tmp#AbstractObject
Type gml:AbstractRingType
Properties
content: complex
abstract: true
Substitution Group
Substitution Group Affiliation
Used by
Model
Source
<element name="AbstractRing" type="gml:AbstractRingType" abstract="true" substitutionGroup="gml:AbstractObject">
  <annotation>
    <documentation>An abstraction of a ring to support surface boundaries of different complexity. The AbstractRing element is the abstract head of the substituition group for all closed boundaries of a surface patch.</documentation>
  </annotation>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:surfaceMembers
Namespace http://www.opengis.net/gml/3.2
Annotations
Restricted in this profile to eliminate infinite recursion
Diagram
Diagram 3_2.tmp#OwnershipAttributeGroup 3_2.tmp#Polygon
Properties
content: complex
Used by
Complex Type gml:MultiSurfaceType
Model gml:Polygon
Children gml:Polygon
Instance
<gml:surfaceMembers owns="false" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:Polygon axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="">{1,1}</gml:Polygon>
</gml:surfaceMembers>
Attributes
QName Type Fixed Default Use Annotation
owns boolean false optional
Source
<element name="surfaceMembers">
  <annotation>
    <documentation>Restricted in this profile to eliminate infinite recursion</documentation>
  </annotation>
  <complexType>
    <annotation>
      <documentation>A container for an array of Polygons. The elements are always contained in the array property, referencing geometry elements or arrays of geometry elements via XLinks is not supported.</documentation>
    </annotation>
    <sequence minOccurs="0" maxOccurs="unbounded">
      <element ref="gml:Polygon"/>
    </sequence>
    <attributeGroup ref="gml:OwnershipAttributeGroup"/>
  </complexType>
</element>
Schema location file:/C:/GaldosOffline/DIGGS_Offline - GMLProfile/Diggs2.0.a/Schemas/gml3.2Profile_diggs.xsd
Element gml:AbstractSurface
Namespace http://www.opengis.net/gml/3.2
Annotations
The AbstractSurface element is the abstract head of the substitution group for
all (continuous) surface elements.
Diagram
Diagram 3_2.tmp#id 3_2.tmp#description 3_2.tmp#descriptionReference 3_2.tmp#identifier 3_2.tmp#name 3_2.tmp#StandardObjectProperties 3_2.tmp#AbstractGMLType 3_2.tmp#SRSReferenceGroup 3_2.tmp#AbstractGeometryType 3_2.tmp#AbstractGeometricPrimitiveType 3_2.tmp#AbstractSurfaceType 3_2.tmp#CompositeSurface 3_2.tmp#Polygon 3_2.tmp#AbstractGeometricPrimitive
Type gml:AbstractSurfaceType
Type hierarchy
Properties
content: complex
abstract: true
Substitution Group
Substitution Group Affiliation
Used by
Model gml:description{0,1} , gml:descriptionReference{0,1} , gml:identifier{0,1} , gml:name*
Children gml:description, gml:descriptionReference, gml:identifier, gml:name
Instance
<gml:AbstractSurface axisLabels="" gml:id="" srsDimension="" srsName="" uomLabels="" xmlns:gml="http://www.opengis.net/gml/3.2">
  <gml:description xlink:href="" nilReason="" xlink:title="">{0,1}</gml:description>
  <gml:descriptionReference xlink:href="" nilReason="" owns="false" xlink:title="">{0,1}</gml:descriptionReference>
  <gml:identifier codeSpace="">